How to Install and Setup WHS

Have you ever wanted to be able to access all of your important files, music, photos, and more from all computers in your home from one central server? Today we’ll take a look at Windows Home Server and show you how to install and configure it with other machines on your network.

Windows Home Server (WHS) is meant for your family needs or for use in a home or small office. It allows you to centralize your important documents and digital media files on one box and provides easy access from other machines on your network. It has the ability to backup 10 computers and restore them if needed. It acts as a media server, backup solution, data recovery, document management, and allows you to access what you need from anywhere there is a web connection. Using a personalized website address, it lets you securely download and upload your data files.

You can buy server machines that already have WHS installed on it, or you can create your own (which is a lot more geeky and fun). The cool thing is that you can repurpose an older desktop to run Windows Home Server. A machine with a 1GHz Pentium III, 512MB of RAM, and an 80GB Hard Drive will work as the minimum requirements, but as you know minimum and recommended requirements are completely different things. You can check out the minimum and recommended system requirements from Microsoft’s WHS PDF guide (link below).

Start the Installation

Installation is very straight forward and easy to do. Boot from the WHS installation disc and kick off the install wizard.


Select your region and keyboard settings…


Now choose the drive(s) that are in the machine. In this case there is only one, but if you have multiple drives, make sure they’re listed. If you want to add additional drives at a later time, it’s a simple process that we will cover in a future post.


Select New Installation…



Accept the Microsoft EULA…



Enter in your Windows Home Server Product Key…



Next it’s time to give your new Home Sever a name…



Again verify the hard drives that will be formatted…



It’s going to ask you again to make sure all the data will be deleted from the drives…


Finally it’s time to kick off the installation process. The amount of time it takes to complete will vary between systems. Count on the entire process taking a minimum of one hour and perhaps longer.


There is nothing needed from you while the install takes place. The system will reboot several times and you’ll see different screens displayed while the process completes…




Finish Installation

When you get to the following Welcome screen, you’re almost done.


Type in a password and password hint for the server.



Decide if you want to set up automatic updates or not…


Choose if you want to join the Customer Experience Improvement Program or not…



Choose if you want to turn on automatic Windows Error Reporting…


That’s all there is to it. You don’t need to leave a keyboard, monitor, or mouse to the server. The only thing you needs to be connected is an Ethernet Cable running to your router (Wireless isn’t supported). You can administer the machine from any computer on your network after installing Windows Home Server Connector on the other machines.



Windows Home Server Console

To connect the computers on your network to the server, you’ll need to install the Windows Home Server Connector which is available as a separate download. You’ll need to install the WHS Connector to every computer on your network that you want to connect with the server. It connects your computers to WHS, allows for automatic nightly backups, monitors computer network health, and enables you to remotely administer the server from your computer.

If you don’t want to waste a CD to install it, you can use a free program like Virtual CloneDrive and mount the ISO and transfer the files to a a flash drive.


Before installing the connector on XP you’ll be required to install Microsoft .NET Framework 2.0 and it’ll guide you through the process if needed.


When you start WHS Connector Setup it will look for the Home Server…


Then it’s just a matter of working through the rest of the wizard.


During the process you’ll need to enter in the password you created for the server.


Decide if you want your computer to wake up if it’s in sleep mode to back it up…


When configuration is complete, we’re shown our settings — wake up the computer for backup between 12:00 and 6:00 AM. Also in this instance, we’re getting a message that one of the drives in the PC won’t be backed up. This is because it’s formatted as a FAT 32 volume and it will only backup drives formatted as NTFS.



The Home Server Console icon sits in the system tray and you can control some of it’s settings by right-clicking the icon.


It will display your network’s health and show security warnings (this feature can be easily turned off). In this instance we can see one of the machines on the network has its firewall turned off.



When you open up WHS Console, you’re prompted to log into the server. There are a few other features here to like having the password remembered, password hint, and resetting the console.


Once you’re signed in, you can configure and administer the server and its different functions. We’ll be taking a closer look at the WHS Console in future articles.


If you need to make more detailed changes to your server, another good option is to use Remote Desktop, which is easier than hooking up a monitor, keyboard, and mouse to it.


Download Updates

Now that installation is complete we need to add all the of the latest updates from Microsoft. Click on Start \ All Programs then Windows Updates. This will provide you with the latest server security updates and Power Pack updates as well. Power Packs are updates that add new features and provide fixes to known issues for Windows Home Server.


This guide should get you started using your new Home Server. It comes in handy in a lot of cool ways if you want to centralize your digital entertainment and access it from any machine running XP or above. Or if you have a home or small office and want to be able to access your work from anywhere there is a web connection. There are several good reasons to have your own server at home, if you’re a power user. Over the next year we will be bringing you more detailed tutorials on how to set up and use your Home Server. If you happen to have an extra desktop you’re not using and can dedicate as a server, they offer a free 30 Day trial so you can try it out for yourself. If you like it, you can purchase a full license and I have seen it around the web for around $99 or a little cheaper depending on where you look.

Download Windows Home Server 30 Day Trial

Download Windows Home Server Connector Software CD

Windows Home Server Getting Started Guide (PDF)

Install Windows 7 with USB drive

If you have a netbook and would like to upgrade it to Windows 7, you may be wondering how to do it without a clunky external DVD Drive. Today we show you how to install Windows 7 from a USB flash drive.

Installing Windows 7 from a flash drive is essentially the same as installing it from a DVD. Most of the work is setting up your flash drive so it becomes a bootable device with the OS on it. Here we will take a look at a couple of utilities that will allow you to easily create a bootable USB drive and copy Windows 7 to it.

Note: You’ll need a minimum of a 4GB flash drive to dedicate to the installation files.

Windows 7 USB/DVD Download Tool

If you have an ISO image of Windows 7, using Microsoft’s free utility is a quick and easy option to get the image on your USB flash drive. It requires XP SP2 or higher and if you’re using an XP machine you’ll need .NET Framework 2.0, and Microsoft Image Mastering API V2…both of which can be downloaded from the link below. It seemed to work best if I formatted the flash drive as NTFS before using the download tool. But that could be because of the flash drive I used…your mileage may vary.




It’s a pretty straight forward process, first browse to the location of your Windows 7 ISO file and click Next.


Select USB device…this also helps you burn the ISO to DVD as well if you need that option.


Choose your flash drive and click Begin copying.



Now just wait for the process to complete. The drive will be formatted and files copied to the flash drive.



When the process is finished you will be able to see the files on the flash drive as you would if you opened the installation disc. Now you can start the installation on any computer that allows you to boot from a USB drive.




If you want to transfer a Windows 7 installation disc to USB…another super easy utility to use is WinToFlash. Just follow through the straight forward wizard, and you’ll be ready to install Windows 7 from your flash drive in no time.


The neat thing about this utility is it also offers different advanced features and tasks for other versions of Windows too.


It’s as easy as choosing the location of the Windows installation disc and the USB drive. Where in this example the DVD is drive (E:) and the flash drive is (F:). They recommend to turn off your Antivirus to increase the process speed, but we had MSE running on our machine and it didn’t seem to affect performance at all.


Next, you’ll need to agree to the Windows 7  EULA and hit continue.



Now just wait until the drive is formatted and the files are transferred over to the USB drive. The amount of time it takes will vary between systems. In our test it took around 10 minutes to complete over to an 8GB flash drive.


That’s it! Now the drive is ready so you can install Windows 7 on your netbook or any other computer that supports booting from a USB drive.


WinToFlash –

Windows 7 USB Tool –